scáthán 8k 304 316 leathán cruach dhosmálta
Cur síos gairid:
Ábhar Grád: 304 316 304L 316l 3 309s 310s 321
Teicníc: Rollta te / rollta fuar
Dromchla: Scáthán 8K
Caighdeán Ábhar
| Uimh.1 | GB | AN RÚIS | AISI, STM | JIS | BS | DIN | ISO |
| 1 | 1Cr18Ni9 | 12KH18H9 | 302, S30200 | SUS302 | 302S25 | X12CrNi88 | 12 |
| 2 | 0Cr18Ni9 | 08KH18H10 | 304, S30400, TP304 | SUS304 | 304S15 | X5CrNi89 | 11 |
| 3 | 00Cr19Ni10 | Z2CN18.09 | 304L S30403, TP304L | SUS304L | 304S12 | X2CrNi189 | 10 |
| 4 | 1Cr18Ni9Ti | X10CrNiTi189 | |||||
| 7 | 0-1Cr18Ni12Mo2 Ti | Z6CNDT17.12 | 320S17 | X10CrNiMoTi1810 | |||
| 8 | 00Cr17Ni14Mo2 | 03KH17H14M2 | 316Ls S31603, TP316L | SUS316L | 316S12 | X2Cr | 19, 19 |
| 9 | 0Cr25Ni20 | 310S, S31008s TP310S | SUS310S | ||||
| 15 | 0Cr23Ni13 | 309S, S30908 | SUS309S | ||||
| 16 | 0Cr17Ni12Mo2N | 316NS S31651 | SUS316N | ||||
| 17 | 00Cr17Ni13Mo2N | Z2CND7.12N | SUS316LN | X2CrNiMoN1812 | |||
| 18 | 0Cr18Ni12Mo2Cu | SUS316JI | |||||
| 19 | 00Cr18Ni14Mo2Cu2 | SUS316JIL | |||||
| 20 | 0CM9NM9N | ZCNS18.09A2 | 304 | SUS304N |
Comhpháirt Cheimiceach
| Grád | C | Cr | Ni | Mo | Eile |
| 301 | ≤0.15 | 16.0～ 18.0 | 6.00 ～ 8.00 | - | - |
| 301L | ≤0.030 | 16.0～ 18.0 | 6.00 ～ 8.00 | - | N≤0.20 |
| 304 | ≤0.08 | 18.0～ 20.0 | 8.00 agus 10.50 | - | - |
| 304J1 | 0.02 go 0.05 | 16.5～ 17.1 | 7.5～ 7.9 | - | Cu1.9～2.2 |
| 304L | ≤0.030 | 18.0～ 20.0 | 9.00 – 13.00 | - | - |
| 304N1 | ≤0.08 | 18.0～ 20.0 | 7.00 agus 10.50 | - | N0.10～ 0.25 |
| 304N2 | ≤0.08 | 18.0～ 20.0 | 7.50 agus 10.50 | - | Nb≤0.15 |
| 316 | ≤0.08 | 16.0～ 18.0 | 10.00 – 14.00 | 2.00～ 3.00 | - |
| 316L | ≤0.03 | 16.0～ 18.0 | 12.00 – 15.00 | - | - |
| 321 | ≤0.08 | 17.0～ 19.0 | 9.00 – 13.00 | - | ti5×C% |
| 409L | ≤0.03 | 17.0～ 19.0 | - | - | Ti6×C%～0.75 |
| 410L | ≤0.03 | 11.0 agus 13.5 | - | - | - |
| 430 | ≤0.12 | 16.0～ 18.0 | - | - | - |
| 430J1L | ≤0.025 | 16.0～ 20.0 | - | - | Nb8（C%+N%）～0.8 Cu0.30～0.80 |
| 436L | ≤0.025 | 16.0～ 19.0 | - | 0.75～ 1.25 | Ti, Nb, Zr8 ×（C%+N%）～0.8 |
| 410 | ≤0.15 | 11.5～ 13.5 | - | - | - |
| 420J1 | 0. 16 go 0.25 | 12.0～ 14.0 | - | - | - |
| 420J2 | 0.26～0.4 | 12.0～ 14.0 | - | - | - |
| 2205 | 0.38 go 0.43 | 21～23 | 4.5～ 6.5 | 2.5～ 3.5 | - |
| 2507 | ≤0.03 | 24.0～ 26.0 | 6.00 ～ 8.00 | 3.0～ 5.0 | - |
Dromchla Tabhair isteach
Críoch 8K :
Snasú an pláta cruach dhosmálta le leacht snasta trí threalamh snasta, ionas go mbeidh gile an phláta chomh soiléir le scáthán.
Míniú: Amhábhair cruach dhosmálta, tar éis próiseáil mheilt agus snasta, beidh an dromchla réidh agus le snasta scátháin, pláta cruach dhosmálta,
annTá 2B, BA, gnáthdhromchla, dromchla 8K, dromchla 8K an 8k is fearrleathán cruach dhosmáltais féidir dath a bheith plátáilte, mar an pláta dath cruach dhosmálta 8k
Iarratas
á n-úsáid le haghaidh bord balla halla, uasteorainn, bord carr ardaitheoir, bord carr, maisiú foirgneamh, cláir chomharthaí agus maisiú eile, úsáidtear bord cruach dhosmálta dath go ginearálta i maisiú an bhalla agus maisiúcháin eile
Taispeáin Táirge
Pacáiste
